DENON Service Bulletin DZ10-146 free download

File name Service Bulletin DZ10-146.PDF

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : DZ10-146 Date: October 13, 2010 _____________________________________________________________ Model: RCD-N7 Subject: Correction of the Firmware via DPMS Countermeasure is applicable only upon claim from the customer. Symptom: 1) Add a new feature that "PartyMode Plus" (add "ZoneManagement function", "operation by Attendee of PartyMode".) 2) Add a new feature that "Update Notification function" which that "Displays a notification message on menu screen when the latest firmware is released. 3) Countermeasure for failure. 3)-1 The unit cannot pause by PLAY/PAUSE button of RCD-N7 or remote control unit after start playback of Data CD(MP3,WMA) by push a PLAY/PAUSE/ENTER button of RCD-N7. 3)-2 If reset the unit then chose "Wireless" then chose "SSID" and push a "ENTER button", "Connection failed" will be displayed and cannot connect wireless. 3)-3 "This is a function for only E3 model". When push ENTER button after chose "I am new to Pandora" after select the function of "ONLINE MUSIC" to "Pandora" during "Read only mode" of Pandora, a message that "Activation has not been completed" will be displayed on the monitor. 3)-4 The unit does not connect to Network automatically after updated the IMG of DM870 by DPMS after connect the unit to wireless LAN. Solution: We corrected the firmware so that no malfunction occurs. Updating the firmware (Refer to the Instruction Manual.) 1) Turn the Power Supply of the unit off. ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting from the misuse of the information contained in this document. 2) Connect the Ethernet terminal of the unit to the Network line by Ethernet straight cable. (Don't use Ethernet cross cable.) 3) The connection of the network recommends the Ethernet cable for certain update. 4) Turn the Power Supply of the unit on. 5) The unit sets the Internet. It wishes waiting for about two minutes until customer's router ends the setting. Caution: The update doesn't succeed when the customers set cannot hook up to the Internet correctly. In this case, please confirm the internet environment of the customer house. If the Internet radio can be received correctly or not can